Utility room, cheap but made to measure worktop

[noarguments]

I just need a cheap bit of laminate to sit on brackets above my washer and dryer to provide a useful work area /dumping ground. Anyone know where I can get one, it needs to be deeper than standard, and I'm struggling to find something basic. B&q do something but part of a bigger kitchen design service. I've not found an online place that does non-standard depth. Thanks.

Wickes.

Independent kitchen shops

Ooh, Wickes, had forgotten about Wickes! Thank you, will go and look.

Worktops are sold in standard lengt and width, usually either 3.6m or4.1m length and width 600mm or 900mm. You'll just have to get it cut to size, B&Q do offer this service

I got a nice piece of Bushboard from a local kitchen shop - it was an offcut and was on ebay.

It's 66cm deep and has an edge both sides (breakfast board) and is about 6ft long.

I don't need it after all but it was £60. Try looking on ebay as people often have offcuts. Or ask in a place like Howdens.

Do you have a local timber merchant? We have a local timber shop that sells worktops and they have a made to measure service (think its £10 to have anything cut to your specific dimensions). But I second the advice above, ebay is good for offcuts and if you have any kitchen companies locally, might be worth giving them a ring as they will have offcuts too.

Homebase will cut to size and deliver also x

Definitely have a look in your local paper or small ads, I sold a 6ft off cut of worktop for £10 about 6 mths ago, left over from my new kitchen. It was brand new and still had its protective plastic film on it.

I bought only a worktop from B&Q. I chose it, they cut it (into several pieces) for me according to my measurements and then they packed it into my car!