My feed
Premium

Please
or
to access all these features

Join our Property forum for renovation, DIY, and house selling advice.

Property/DIY

Kitchen extractor fans/hoods - recommendations please

8 replies

MoonlightandMistletoe · 13/12/2014 21:19

Ideally in brushed steel, quiet, vaguely industrial, to go over small (70cms) gas hob. Will be venting outside rather than a re-circulating one.

OP posts:
Report
nootychoo · 14/12/2014 01:08

Hi Moonlight, you haven't been very clear about what type of extractor you want, but I have this telescopic Bosch one:

www.bosch-home.co.uk/our-products/cooking/cooker-hoods/cooker-hoods-range/DHI635HGB.html

It is built in to a cupboard above the hob, is virtually invisible when not in use (just a strip of stainless metal at the base of the cupboard) can be ducted or recirculating, (mine is ducted to an outside wall) and you pull it out to switch it on. I am really pleased with it. It is not particularly quiet though......but I have yet to find an efficient one that is!

Report
MoonlightandMistletoe · 14/12/2014 20:23

Thanks nooty - yes, should have said, no cupboards on that wall so can't do a telescoping one Sad do like the 'flatness' of that style though. Also, have re-measured, and it looks like we'd need closer to an 80/90cms too - will look at some of Bosch's other offerings if you find yours good.

OP posts:
Report
neepsandtatties · 14/12/2014 21:10

An alternative to a chimney on a wall with no cupboards is to build out a plaster-boarded 'chimney' and then use a standard under canopy extractor. Paint the chimney the same colour as the wall, and it will disappear. See photos below

www.woodworktops.com/gallery/g02.jpg

www.woodworktops.com/gallery/g05.jpg

Report
suze28 · 14/12/2014 21:33

We've got a Siemens extractor now above our 90 cm induction hob and are very pleased with it. Our previous extractor was by Elica another brand worth looking at too.

Report
Gozogozo · 14/12/2014 22:09

Falmec do a simple steel extractor one called the Plane. Noise reduction variant available as well & they will custom make one if you have special requirements. They are more expensive than elica, I think, but more flexible. Elica do some beautiful extractor but they didn't have a high enough extraction for my space.

Report
MoonlightandMistletoe · 16/12/2014 22:14

Thanks all - DH rather went and jumped the gun with this one (there go my 'sleek industrial-esque' lines Xmas Sad so hope this works as well as yours suze.

OP posts:
Report
suze28 · 17/12/2014 20:06

www.siemens-home.co.uk/our-products/cooking/cooker-hoods/LC98GB542B.html?source=browse
[Moonlight] This is the one we have and I'm delighted with it.
Sorry for lack of proper link as I'm on my phone and am not quite sure how to do them!

Report
MoonlightandMistletoe · 17/12/2014 21:34

Thanks suze!

OP posts:
Report
Please create an account

To comment on this thread you need to create a Mumsnet account.