Best Amazon Prime Day deals: Mumsnet favourites

Best Amazon Prime Day deals:
Mumsnet favourites

Shop now

Please or to access all these features

Housekeeping

Find cleaning advice from other Mumsnetters on our Housekeeping forum.

Bosch washing machine not spinning...

11 replies

whereiseveryone · 24/11/2013 18:02

Anyone had a similar problem?

Can we fix it or is it time to say goodbye?

OP posts:
CaurnieBred · 24/11/2013 18:04

Yes. You probably need the carbon blades (or something like that) replaced. We had the same thing and once they were replaced it was as good as new - this was when it was about 4 years old

CaurnieBred · 24/11/2013 18:06

Just Googled: it is carbon brushes not blades

IHadADreamThatWasNotAllADream · 24/11/2013 18:06

Sounds like dead brushes. Replaceable - not cheap but a lot cheaper than a new machine.

whereiseveryone · 24/11/2013 18:10

Hmm...

Anyone know how much brushes would cost to replace?

It's about 11.5 years old. Gut feeling is to flog it on Fleabay for spares/repairs and get a new one.

OP posts:
AugustRose · 24/11/2013 18:17

Yes they are cheap to buy (just £2 or £3 on amazon) it's having them fitted that costs - I was going to do my own but it was more tricky that I anticipated. The repair cost me £65 including brushes and it has been working fine since they were replaced 18 months ago and my machine is 9 years old now and used a lot.

IHadADreamThatWasNotAllADream · 24/11/2013 18:22

I paid about 60-70 quid for replacement as well. You'll get a few years out of each new set.

whereiseveryone · 24/11/2013 18:23

We've just found a few videos on Youtube showing how to replace them so DH is going to give it a go. He's quite technical so fingers crossed!

Thanks everyone Smile

OP posts:
somewheresomehow · 27/11/2013 17:30

could be the filter as well, you could get him to look at it while hes having a fixing moment

Tiptops · 27/11/2013 17:39

Our washing machine doesn't spin when the filter is blocked. Really easy to just undo it and remove any lint.

Mumof3girlys · 27/11/2013 21:40

Could also be the heat element, mine went few weeks ago just keep stopping and not doing the spin/drain part of the cycle because it wasn't getting to the right temp to complete the wash cycle

Alwayscheerful · 27/11/2013 22:26

Before checking out the above ensure no little fingers have not pressed "delay spin" button or similar, to minimise creasing.

New posts on this thread. Refresh page