FAO anybody who uses Minky dimple dot fabric. Help needed please.

[Itsjustnotcricketisit]

Good morning.
Please can anybody help ?
I have made a couple of tag blankets with dimple dot Minky fabric.
The YouTube tutorial says iron it, but when I did, the dimples in that part are almost flat now compared to the dimples everywhere else on the fabric.
Is there a way to bring those dimples back to the way they were before?

I will post a photo shortly, but in the meantime, in case anybody knows what I mean without the photo, your help will be very much appreciated 💐💐

I would try applying heat, either a short whirl in the tumble drier or steam (steam iron used without touching the fabric or actual steamer). Have you already tried washing it?

Use scrap pieces of fabric to test, and check the other fabrics you’ve used are steam/tumble safe.

I wondered whether steam would do it. Hover the steam iron above it or use the "steam shot" if your iron does it.

I’ve had it in the tumble dryer on high heat, but compared to the one on the right, it still looks the same.

I’m going to try the steam iron method , see if that method works.
I’ll update when I’ve had a go.
Thanks for the advice all 💐

After using the steam function on the iron …
Looks like it’s getting there 👀😁

That’s looking a lot better!