Please or to access all these features

AIBU?

Share your dilemmas and get honest opinions from other Mumsnetters.

Karndean - finish

33 replies

Swimmum78 · 29/11/2021 18:25

Can anyone who has had karndean/any glue down lvt let me know if this finish is acceptable. I've gone for this product as I didn't want beading. However there are some small gaps between the floor and the skirting. Not sure if I am being too much of a perfectionist. Fitters are coming back tomorrow to do another room so opinions on whether I should ask then to rectify gaps. Pics attached.

Karndean - finish
Karndean - finish
OP posts:
New posts on this thread. Refresh page
Thread gallery
6
Swimmum78 · 30/11/2021 09:50

Couple more

Karndean - finish
Karndean - finish
OP posts:
Swimmum78 · 30/11/2021 09:49

Dh now agrees btw. He only thought there was 1 gap, which we would just ask to rectify. I've gone round this morning in the light and got more/clearer pics. I'm not sure whether to ask for different fitters as these obviously think this is acceptable.

Karndean - finish
Karndean - finish
Karndean - finish
OP posts:
fuckyourpronouns · 29/11/2021 21:28

Very poor job @Swimmum78

Tbh though I'd be more pissed off with your husband who thinks it's acceptable to not question this and fork out cash for a shoddy job!!! What is wrong with him?

Kitkat151 · 29/11/2021 21:17

[quote newname12345]@HoardingSamphireSaurus

That's fine if you have a rectangular room with with straight walls. Our room (actually two room joined through a double door) has multiple different widths with a curve at one end so impossible to do as you say.[/quote]
You don’t need straight walls....I have it in my bathroom...round my toilet ....neat as anything....no gaps

HoardingSamphireSaurus · 29/11/2021 21:00

That's the whole point if vinyl though. It can be cut to meet any shape. You just have to plan it thoroughly and know how to use shaping tools for measuring the odd bits. Though a piece of wood, ruler and pencil will do it just as well.

And get a well trained, experienced fitter.

newname12345 · 29/11/2021 20:56

@HoardingSamphireSaurus

That's fine if you have a rectangular room with with straight walls. Our room (actually two room joined through a double door) has multiple different widths with a curve at one end so impossible to do as you say.

HoardingSamphireSaurus · 29/11/2021 20:43

[quote newname12345]@HoardingSamphireSaurus

I don't think you understand what Karndean stickdown LVT is. It comes in 'planks' so its quite usual to end up with planks cut in this way at the edges.

The fitter though should have made a better job of cutting those pieces.[/quote]
Oh but I do. And they should have measured the room and laid the planks differently, meaning they'd cut more ' planks' but they would have been wider at the edge of the room.

I've just overseen the laying of karndean in an 'executive home' refurb. We had a long conversation about where the strips should be measured/started from to get the best finish. My client wouldn't have accepted that, I'd have had to pay for the refit!

CheshireDing · 29/11/2021 20:41

Your DH would really accept that OP?

It looks shit !

StoneofDestiny · 29/11/2021 20:32

Definitely not good enough. They need to fix it, you are not being picky at all.

Skinnyankles · 29/11/2021 20:29

Definitely point the errors out

Skinnyankles · 29/11/2021 20:28

Dh is a floorlayer and specialises in these vinyl floors. Sorry OP, this is a real shoddy job. The vinyl should be tight fitting to the skirting boards. Mine aren't like that at all!

Karndean - finish
Pawprintpaper · 29/11/2021 20:13

Watch out if the sun falls on those pieces because you may find it shrinks further and the gaps between planks widen. Happened to both our floor and my mum’s in a sunny square in the kitchen (both have karndean)

R0llonspring · 29/11/2021 20:07

@Mantlemoose

No that's not acceptable however that's the whole point of beading.
I chose Karndean because it didn't need beading.

The fitter cut it tight to the existing skirting, it's a clean line with no gaps like yours OP. I think they were hoping you wouldn't notice the gaps and it is very straightforward for them to swap those boards out, so nothing to worry about.

Kitkat151 · 29/11/2021 19:59

@Mantlemoose

No that's not acceptable however that's the whole point of beading.
But there’s no need for beading with LVT
Kitkat151 · 29/11/2021 19:59

@Brogues

I have amtico and there are no gaps. That’s a shoddy job.
I too have amtico....I too have no gaps
Babamamananarama · 29/11/2021 19:56

DH and I fitted our own floor once because we were trying to save money. We managed better edging than that. I'd expect a much better finish from a paid professional.

TheBareTree · 29/11/2021 19:52

No, that’s rubbish.

Swimmum78 · 29/11/2021 19:51

To clarify most of the flooring is flush to the skirting, it's just in a couple of places there are gaps. I will speak to the fitters tomorrow before they start the next room. Dh thinks I am being too picky but glad to hear consensus is I am not.

OP posts:
newname12345 · 29/11/2021 19:49

@HoardingSamphireSaurus

I don't think you understand what Karndean stickdown LVT is. It comes in 'planks' so its quite usual to end up with planks cut in this way at the edges.

The fitter though should have made a better job of cutting those pieces.

PyjamaFan · 29/11/2021 19:46

That's rubbish. I wouldn't be happy with that at all.

CaptaNoctem · 29/11/2021 19:44

I have Karndean and no I would not accept that

Chasingsquirrels · 29/11/2021 19:38

Not acceptable at all.
I've had it laid to skirting in hall & downstairs loo, pretty much right up to the skirting.
In my kitchen, conservatory & utility we had the skirting off anyway and they laid upto the wall then we refitted the skirting on top so the flooring goes underneath it.

Brogues · 29/11/2021 19:37

I have amtico and there are no gaps. That’s a shoddy job.

bungaloid · 29/11/2021 19:37

Not good enough

User2638483 · 29/11/2021 19:34

I wouldn’t like that
BUT mine was laid before the skirting
That’s generally better