Please or to access all these features

AIBU?

Share your dilemmas and get honest opinions from other Mumsnetters.

Computer help needed!

33 replies

RedCarsGoFaster · 19/10/2021 16:08

I give up. IBU.

I have two laptops for WFH. Different systems. One is an elderly HP, the other is a brand new Microsoft Surface. I like to keep them closed and hook them up to my external screen as it's much bigger.

I have one external screen, one USB mouse and one USB keyboard.

I've bought a KVM switch and hooked it all up. I can only get one sodding laptop to work on the screen.

Help! I'm going nuts! I'm usually tech savvy, but today I'm definitely too tired for this and google has NOT been my friend. AIBU to beg for help?

OP posts:
RedCarsGoFaster · 20/10/2021 22:56

Billing I for any IT geniuses out there who can save my neck from permanent aching!

OP posts:
RedCarsGoFaster · 20/10/2021 12:02

Because MN loves a diagram (and my desk looks like a snake's wedding so a photo is pointless).

Both laptops are set to do "nothing" when the screen is closed.

Separately they work as normal with the screen.

I normally plug the VGA cable from the HP Windows 7 laptop into the screen, and the HDMI cable from the Surface Windows10 laptop into the screen as well. I've never used the two together in this way - I usually have the Surface on the big screen and the HP on it's laptop screen but I can't keep this up.

Computer help needed!
OP posts:
Camenbertsmuggler · 19/10/2021 20:35

Do they both work with the monitor if you take the KVM out of the equation?

MattHancocksSexTape · 19/10/2021 17:49

What is going to the KVM from the laptop?

CobraChicken · 19/10/2021 17:13

Which one isn't working? If it's the Surface, are you using a dock? What specific KVM switch are you using? Are both laptops Win10, and if so, which build version?

RedCarsGoFaster · 19/10/2021 17:09

I'll check the settings again, but both are set up for working with the lid closed separately, one's just not responding now with this switch.

OP posts:
MrsTulipTattsyrup · 19/10/2021 17:01

Yes, you need to fiddle with your display settings so the external monitors are your primary displays rather than the laptop screen.

I’m bad at this so can’t help in detail but managed it by fiddling.

KrisAkabusi · 19/10/2021 16:58

Is one of them going to sleep because the lid is closed? It might not be getting a signal back from the switch (because it's no longer connected to the screen that returns a signal down the cable) to stay awake in that situation. Can you try changing the setting to make it stay on when closed?