Please or to access all these features

AIBU?

Share your dilemmas and get honest opinions from other Mumsnetters.

Alex Monroe is ridiculous

114 replies

buzzoffbee · 20/09/2021 15:42

I really loved their hidden bee locket but wanted it 50% bigger. (1.5cm tall instead of 1cm)

After several attempts and mis-communications with them going back to April, I finally managed to get a quote from them today! The original is £775, they want between £3500 and £5000!

Is it me, or does anyone else think they've lost the plot? They really don't want to make this necklace for me, do they?

Anyone recommend a similar jeweller who can make something similar at a more reasonable price?

OP posts:
LittleGwyneth · 20/09/2021 17:02

Get something similar but not a direct rip off made by a custom jewellery designer.

buzzoffbee · 20/09/2021 17:01

I have already accepted IABU!

Please can anyone recommend British Jewellers who are more reasonably priced and work in solid gold not just gold plate?

For example I really like Lily and Roo

Anyone know others which are similar?

OP posts:
TooGoodToGoNewbie · 20/09/2021 16:55

@BeenAsFarAsMercyAndGrand

They might make the standard one 'to order', but they will have a pre-made mould that they use to make each one, with one mould making a large number of pieces. The cost to them of making the standard size are therefoee significantly lower than making a bespoke piece.

A 50% increase in size will require them to make a fresh design and mould etc. that they will only be able to use once. It was never going to be just a 50% increase in price, or even just a 100% increase.

This was what I was thinking, so time, skill plus extra gold.
WoozySnoozy · 20/09/2021 16:55

And then there's the extra value in having a bespoke design

WoozySnoozy · 20/09/2021 16:54

@buzzoffbee

I bake cakes- if someone wanted a 12oz cake instead of a standard 8oz cake I wouldn't increase the price from £50 to £325- it doesn't make any sense!
You would if you had to buy new equipment in that cost you that much.

I think you're being unreasonable. They've told you how much it will cost. So either accept it or don't but don't complain about them for being open about the costs up front.

Luhou · 20/09/2021 16:51

Hi OP

Try a brand called Cabbage White England. I have a few of their bits and a few people have asked if it's Alex Monroe

Againstmachine · 20/09/2021 16:50

You requested a quote eithier go with it or don't. No one Is forcing this pendant on you .

I don't understand point of complaining about it.

lynntheyresexpeople · 20/09/2021 16:49

They are made to order, but they have a mold already in place. They'd have to make an entire new mold specifically for you. Plus, as explained, it's not 50% more gold. Don't pay it if you don't want to, but yabu. It's nothing like cake making.

Wilkolampshade · 20/09/2021 16:49

Just about any jeweller will be able to start from scratch and do it cheaper, but that's not what you wanted is it?

Wilkolampshade · 20/09/2021 16:47

Well its cast isn't it? So making it a non standard size requires the making of an entirely new model of the original form but in the new size from which new moulds must be made and into which your extra gold must be poured.
TBH don't really see how they could do it for less and make a profit.
FS.

ferretface · 20/09/2021 16:43

I'm a (part time) jeweller, it's likely that the original is cast copies of an original master. It's much cheaper and faster to cast copies than it is to make from scratch so you are effectively paying for all the original making time, as well as a slightly increased materials cost.

It's also a well known brand so there's probably an element of charging for that but depending on the making method, it can be quite a lot more expensive to make what seem like minor changes to a design. Certainly for anything that is usually cast from an original master (rather than CAD) it's going to be expensive.

MadameMinimes · 20/09/2021 16:40

If you increase the length by 50% the volume of gold increases by much more than 50%, as others have said.

If you’re a baker surely you’re aware that if someone asked you to make a cake 10x10 inches and 4 inches deep and then someone else wanted one that was 15x15 inches and 6 inches deep that you’d need a lot more than 50% more mixture. The second cake would need over 3 times the amount of batter despite only being 50% longer. I think you need to re-do your maths. This is not the rip off that you think it is.

SirGawain · 20/09/2021 16:39

Of course a one of item is much more expensive. for a standard size they will have the moulds and tools set up. for one off they would need to be specially made. it's rather like asking for a car three feet longer than usual.

Limejuiceandrum · 20/09/2021 16:39

I actually agree with you. I would maybe expect to pay £1800
But they obvs don’t want your custom and they obvs don’t want to make bespoke items, it’s not worth it for them.

Etsy has a lot of jewellery makers could you try someone one there. Or the guild of silversmiths

I had a piece of hers, it was cheap and shit, actually it was the bee, though the famous one. I can see a locket is more difficult.

But honestly, someone will fucking hand carve you one for less than that. I would actually presume they don’t have the skilled staff for it, and they outsource their mould etc and the “handmade” bit is simply filing it down.

RealBecca · 20/09/2021 16:36

What @ClumpingBambooIsALie said.

Plus they will charge for their time and if it takes them 4x longer to do all that then thats 4 items at 4x profit they could be doing instead.

SusieBob · 20/09/2021 16:36

@buzzoffbee

Yes, that's what I thought *@LittleLottieChaos*
Looking at the locket I don't actually think this is the case.

It's a complex piece, and sizing it up so it remains in proportion will be difficult. Plus they aren't going to be able to reuse any of the tooling they will need to create which often runs to thousands of pounds.

Just accept that you don't understand the economics of bespoke pieces vs mass (or even just small scale multiple)-production.

ClumpingBambooIsALie · 20/09/2021 16:33

@Genegenieee

Really surprised you don't get the difference between buying it in a mass produced size, and one that is made to order in a different size - in gold.

We really need to teach more business skills and commercial thinking in schools

Or even basic maths — it's kind of surprising that someone could go through the school system and come out without an understanding that volume increases a lot more than length when you scale things up.
buzzoffbee · 20/09/2021 16:31

Yes, that's what I thought @LittleLottieChaos

OP posts:
Fere · 20/09/2021 16:31

OP if you want to appreciate the complexity if making a piece if jewellery from scratch watch All that glitters. www.bbc.co.uk/programmes/m000v4ft

Heronwatcher · 20/09/2021 16:31

I don’t understand the point of this thread at all- is it that you think they have miscalculated in some way? If the former ask for their breakdown- if they want the business they will engage with you. If the latter then it’s their right to quote over the odds if they don’t especially want the commission. Also your right to not buy it. Neither scenario is especially ridiculous.

NalPolishRemover · 20/09/2021 16:31

Have you seen how complex the design of that locket is?
I think you're the one being ridiculous!

Gorl · 20/09/2021 16:30

@buzzoffbee

OK, I accept i am being unreasonable to think it should be cheaper, but I think I can find something much better for that amount of money....
Well then, you’ve found your solution Smile
LittleLottieChaos · 20/09/2021 16:28

They possibly quoted you such a high price to actively deter you. It’s a lot of extra work potentially for not as much return. These brands like to focus on churning out mass produced best sellers.

You’re better off spending the ££ on something vintage and different…

suspiria777 · 20/09/2021 16:27

@buzzoffbee

OK, I accept i am being unreasonable to think it should be cheaper, but I think I can find something much better for that amount of money....
try one of those £19.99 doll pendants necklaces they have in Argos, that seems like it might suit you better.
OneTC · 20/09/2021 16:24

but I think I can find something much better for that amount of money

Well yeah, so problem sorted 👍