New Eicig smoker, need some help

[OkyDoke]

Hello!

Have been smoking Aspire e-cig for nearly a week but for the last couple of days I've not een able to inhale much, it's just bubbling and spitting at me? It's also getting boiling hot.

Is this normal? How can I fix it? I really want to go and buy some cigarettes right about now :(

Aspire do a decent sized range of tanks & kits, so to tell exactly what could be wrong would be difficult without knowing which one it is. However the first thing to check is that the tank is clear & the wicks haven't gunked up or lots of liquid got into the main tube you vape through. If you have a spare tank then try swapping on to that & see if it makes a difference, or if spare coils came with the kit try changing that?

Oh I don't know which it is :( will look at manual when I get back home. I don't really know what you mean by the rest though. It doesn't have any visible wicks, it's just a metal tube in the middle. No spare anythings...

Does the metal tube bit you draw through come out? If so, take that out then try very gently poking something like a cheapo (and therefore skinny) cotton bud down the tube that will reveal, or even a screwed up corner of tissue or kitchen roll. If that comes away with liquid on it, that means you got liquid down the tube (very easy to do, I do it loads) which could be causing your problems.

Okay, I will try that when I get home! Five hours of work to battle through :)

It is a chamber you put the liquid in through the base where it connects to battery. So I need to avoid getting the liquid in the tube part. I really know nothing about these!

Don't worry - we all started out from a position of total ignorance. At least on this forum (as opposed to some of the dedicated vaping forums) you get no willy-waving "my kit is bigger/more expensive than yours" and no snobbery about what kit you use or if you don't know stuff .
Keep asking the questions, none are too silly.

You're right in that you need to avoid getting the liquid into the tube part when you fill your tank. The accepted technique is to take the bottom out then tilt the tank slightly to one side, then you can sort of dribble the liquid so it runs down the inside of the tank & doesn't get into the tube. If that IS the problem, you can either clear it out or if you have problems then vape through it (though cleaning is the preferred option). Just watch out for part of the end of the cotton bud getting left behind in the tube, that's caught me out before. If you do leave part of it behind, you can just poke it out with the (now much thinner) end it came off.

Thanks everyone! I'm struggling to post a pic but I'll keep trying as now it's just leaking all over the place! Everything obvious seems to be tightened up.

www.ecigwizard.com/aspire-bvc-clearomiser-2797.html

Its this chamber.