Rangemaster part needed!

[MargaretThursday]

We have a Rangemaster 90, (looks similar to this one ) and I noticed a few weeks ago that the main oven door has one screw missing. I think it attaches the inner oven door to the outer one. Chances are very high it's underneath it, but we can't move the oven.
I've contacted Rangemaster and asked and apparently this isn't "a spare part they currently have".

I was going to take the other one out and take it down to a DIY shop, but am a bit worried about not being able to get the door back on.

Has anyone got any idea what screw would fit it? The other oven door is held on differently so I can't even try that. Doesn't have to be an official one if it fits!

Thanks.

Have a look on www.espares.co.uk
They stock some Rangemaster screws.
As an aside, do you not have the handle thing that you use to lower the rollers on the cooker so that you can move it out to clean beneath it? (every decade or thereabouts, in my case!)

Thanks!
If we have the handle thing then I have no idea where it was put. I've never heard about it before.

@MargaretThursday : It's called a levelling tool, apparently. It's a real faff to use as the mechanism it connects to is so near to the floor. Easier to buy a new screw!

Hi OP you can buy a telescopic wand with a magnet on the end. DH has one for retrieving nuts and bolts dropped under his car when he's working on the engine. Really cheap and very handy when fishing about in awkward spots. "Telescopic magnetic pick up tool" on Amazon, £5.99. Goes to 26".

I've got a Rangemaster 90 and weirdly my partner has been faffing with the door this morning.
Is it one of the 4 bolts on the sides of the door. Or is it from the hinge. Because they are different sizes?

@Rattymare

It's one of 2 at the side of the door, not the hinge.

You need an M4x12mm button head Allen key socket bolt. You can get them on ebay for £1.39 for 4 in a pack.
Sorry I can't do the link.

Thank you!! @Rattymare That's brilliant.