Chest of drawer handles help?

[Nk11]

Can anyone suggest what I can replace these draw handles with? They were from oak furniture land I actually hate the handle style now but they don’t even do replacements and I’m struggling to find anything to fit these holes they are 50mm spaced.
Should I put single pulls in each hole and sand off the patch where the plate was or just leave?

You might get more answers on another board, this one is for home education

If you got some long cup handles they would have wider screw holes (so you would need to drill new holes) but would cover what’s already there, although you may have to sand the darker square or wait for it to fade.

https://frenchfurniturefittings.co.uk/product/romeo-martini-cup-handles/

These are 50mm between the holes. you could replace all the handles.

I would give the drawers a sand and light stain in the same colour to cover up the patch, if the new handle doesn’t cover enough.

www.amazon.co.uk/Kitchen-Bedroom-Cabinet-Cupboard-centres/dp/B01FXTJUIA/ref=mp_s_a_1_20_sspa?adgrpid=160874901836&dib=eyJ2IjoiMSJ9.BntaYHJ7crbZnBKrVRhrTASjFqMBCTHXeX_hfVhoaDvKkBhNThWdYkccshEs5ml_yXwmtyVcOEZBBVzVz1AEp_L5NVG7iqmBLMM_9ZbHLGNOjoAhLlNbZm3i0efE_nrRqPifasoNXlGtrAEG5ttLjzrYQdifwvLrV6Ao_KICwPsobfjUZKZEqwT24JvnvVHe5aIeIlWFPfm_nwh3LML1KA.zb9SpUI46Z7MbCTjVHFd28k1PF5L2umqiHtjwsPuubg&dib_tag=se&gad_source=1&hvadid=696083153485&hvdev=m&hvexpln=70&hvlocphy=9219816&hvnetw=g&hvocijid=15404954900374565701--&hvqmt=e&hvrand=15404954900374565701&hvtargid=kwd-739784489661&hydadcr=18218_2289260&keywords=drawer+handles+50mm+centres&mcid=0c948769c4663194af4505dc1b9c3ddd&qid=1745252741&sr=8-20-spons&xpid=sEhwm7HXkLRtO&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRm&psc=1

Make your own?

@SoScarletItWas , those screw on to the back of the drawer/cupboard front.

You need to replace all the handles or the whole thing will look odd. If you Google 50mm cabinet handles and select images you'll find a huge choice.

What you do about the patches depends on how the drawers are finished. Are they waxed, stained or varnished? They will become less obvious over time and they won't stand out so much when all the drawers look the same. I'd be inclined to change the handles and leave it for a while.

Try Broughtons online. They have a huge range of nice traditional style handles and are very good quality.
https://www.broughtons.com/store/

The new handles might end up costing more than the chest of drawers.

Did you find a handle that worked Nk11?