Meet the Other Phone. Child-safe in minutes.

Meet the Other Phone.
Child-safe in minutes.

Buy now

Please or to access all these features

Style and beauty

Looking for style advice? Chat all about it here. For the latest discounts on fashion and beauty, sign up for Mumsnet Moneysaver emails.

BIAB Nails really hurts under UV?

15 replies

ToddlerTornado · 20/08/2025 20:51

Iv had BIAB and gel on too done several times. Is it normal for BIAB to really burn when your fingers go under the UV?

Im keen to know if this is common or would I be better off getting acrylic with gel on top instead?

OP posts:
Ineedaweeinpeace · 20/08/2025 20:53

Tell the tech. Take your fingers out and try again - it shouldn’t happen x

NeverEverOhNo · 20/08/2025 20:54

Yes it's normal. When it starts to hurt, take it out, wait a few seconds then put it back under.

Jigglypuff33 · 20/08/2025 20:56

Mine do sometimes, take it out. I find pressing my fingertips down before I put them back under helps

Summer2025wow · 20/08/2025 20:58

I was told it is because your nails are dry …. Make sure your nails and hands are well moisturised.

YourWinter · 20/08/2025 21:01

I’m old and had my nails done for the first time ever in June, for a wedding. I love them so much I’ve had them soaked off and redone every 3-4 weeks. They’re BIAB and there’s no discomfort of any kind at any point. I’ve never had gel or acrylics or anything else done but if it had hurt at all it would have been a one-off and I wouldn’t keep going back!

lavendarwillow · 20/08/2025 21:02

I’ve only ever had BIAB nails done once professionally and my nails did feel the burn, was pretty painful. I’ve since bought my own gel nail kit (not BIAB) and didn’t feel any burn.

ThePinkPoster · 20/08/2025 21:04

Yeah it gets briefly burny but only for a few seconds.

MrCottersJauntyCap · 20/08/2025 21:09

Some gels just cause more "heat spikes" than others. As I do my own nails I know to put them under for 2 seconds then pull them out, back in 2 seconds, then out and then it is usually fine. If you know it will happen tell the nail tech you had issues with heat spikes before and she should do the above.

I've had salon nails or have done my own for 30 years. I also watch a million videos on youtube of nail techs and they talk about heat spikes too.

ginislife · 20/08/2025 21:11

My nail tech says to press your fingers down hard under the light and not to take them out

PotatoBreadForTheWin · 20/08/2025 21:15

My nail tech says they are worse when the weather is warm. Normal though, just take your hand out for a few seconds and try again

Canicule · 20/08/2025 21:16

Funny that there's lots of reasons given by nail techs here, mine said it's when there's a new bottle it stings a bit.

Blondeshavemorefun · 20/08/2025 21:42

Happens rarely with me but when it does it’s usually if I’ve ripped a nail or broken and pulled it off myself - bad blondes know !

so basically I’ve damaged the nail bed

so no they shouldn’t burn

but if it does then it’s down to nail itself

when happens to me the nail man squirts my finger with the little bottle he uses to clean his nail brush he applied the Biab with and then they are fine

Suednymph · 20/08/2025 21:42

I am not a nail tech but have been getting BIAB every 3 weeks for years and sometimes absolutely no burning and sometimes I can feel the burn about to begin so I just take out the hand, give it a few seconds and put back in. If I feel it is about to burn again I do same. This only happens maybe every 4th time not every single time and in my case it works out that the times it burns are the times I am hormonal.

Laiste · 21/08/2025 20:47

Another here who's worn it for years.

Used to get it done in a salon and sometimes it'd burn a bit. Last year or so ive been doing my own at home and every now and then i'll get the burny feeling. I just whip my hand out and put it back in again and it's all good.

suki1964 · 21/08/2025 22:18

You get heat spikes because its so thick and a lot of places dont know how to apply - so its a lot thicker then need be

The finest layer as a base then float the main coat

I do my own and the ones that sometimes make me pull pack from the lamp are the ones I need to file a lot off - Ive applied too thick

New posts on this thread. Refresh page