Meet the Other Phone. Only the apps you allow.

Meet the Other Phone.
Only the apps you allow.

Buy now

Please or to access all these features

Property/DIY

Join our Property forum for renovation, DIY, and house selling advice.

Plinth heaters and cooker hoods,advice please.

17 replies

FuriousGeorge · 17/01/2010 19:46

We are just thrashing out the final details of our kitchen,ansd have decided to add a plinth heater to go at the bottom of a unit,and a cooker hood with an filter.We cant work out if they can be plugged into a normal 13 amp socket or whether they will need a separate circuit each.If you have either or both of these things,please could you tell me how they are wired or just plugged in?

Many thanks
FG

OP posts:
moshie · 19/01/2010 19:39

We have a plinth heater that is plugged in, we didn't go for the expensive one from the kitchen supplier but bought this cheap one from B&Q, and it's great, but only gets occasional use.

We haven't got a cooker hood now, but I'm sure the one we had before just plugged in too.

Heeka · 19/01/2010 19:42

Just checked with electrician dp; both can be plugged in if you wish.

FuriousGeorge · 19/01/2010 21:14

Thankyou both,the electrician is coming tomorrow,so at least I can talk intelligently about them now.

OP posts:
Fizzylemonade · 20/01/2010 11:52

I might be a bit late on this but both of ours are plugged in.

FuriousGeorge · 20/01/2010 15:40

Not too late Fizzy-he is due here in 20 minutes.Thankyou.

OP posts:
alypaly · 21/01/2010 13:17

Plinth heaters need to be in a heavy duty socket as they can have an output of 2kW.

They are very expensive and drying to use too
Have you thought about the slimline central heating rads..the tall ones rather than wide ones.

FuriousGeorge · 21/01/2010 14:25

Thanks Alypaly.We have no space for a radiator in the kitchen sadly.The electrician says he can convert the old cooker point to connect the heater to,so that is less work & less money.As the kitchen has never had any heating,I don't envision using it much,but the thought of something to take the chill off on sub zero mornings really appeals.

OP posts:
alypaly · 21/01/2010 16:12

Depends what else you have coming off the old cooker point. Is it going to be used for the new one or is it redundant

alypaly · 21/01/2010 16:13

It needs to be on a 30Amp cooker cable and fuse as it is a heater with a large output

FuriousGeorge · 21/01/2010 19:05

Yes,it will be a redundant point.You are very knowedgeable-do you work in the trade?I used to,but it was a long time ago now.I've forgotten most of what I ever knew.

OP posts:
alypaly · 21/01/2010 19:13

If its the old cooker cable and fuse thats fine. I personallty think the plinth heaters are rubbish. I had my radiator taken out of my tiny kitchen as it was in the way of the drwaers opening when i had it redone. Dont find it a problem without a heater as the cooker heats the room up when you are in it anyway. Unless yours is a big kitchen.

They also get very dusty and smell of burning dust when used too.

FuriousGeorge am i wrongly assuming you are a man

alypaly · 21/01/2010 19:26

im just in the middle of tiling my kitchen which seems never ending....so ive got light switches and plugs hanging off everywhere at the mo. Will be glad when its all done but there is alot to do yet. Coving and shelves in the pantry next.

FuriousGeorge · 21/01/2010 20:36

I'm not a man.I'm very impressed by your DIY skills.I tiled our last kitchen and I have refused to do this one,as it can be a horrible job,and it took me ages even pre dd's.I've done coving too,but am rubbish at shelves.These days the urge to DIY has passed and I'm happier to get a man [or woman] in.

OP posts:
alypaly · 21/01/2010 21:22

sorry ...that was very sexist of me...its with you saying you were in the trade....sorry

alypaly · 21/01/2010 21:37

No Dh to do it or his he busy

FuriousGeorge · 22/01/2010 09:07

Alypaly,its funny really,this conversation made me comment to DH that I haven't seen or been reccomended a female tradesperson so far.I'm really very surprised,I mean female electricians,plasterers ect,can't be that unusual these days,but there don't seem to be around here.I've spent years working in a very male dominated business,and I'm always busy,so it can't be because people don't want to employ a woman.It's very odd.

OP posts:
alypaly · 22/01/2010 10:07

I love DIY.When i first moved into my house, i was a single lady so financially had to have a go at things.(needs must) Progressed from building an archway in the lounge,to fitting a bathroom suite(and pipes too} to fitting my mums kitchen from start to finish. I love it but im a tad too slow to make any money out of it and im probably too much of a perfectionist. Its gotta be right (unlike some tradespeople)

I think if you wanted a woman for the job you could probably find one on the right websites...i know aot of elderly people prefer a woman and when i go to B&Q invariably there is a woman there in her decorating togs ,buying things.

New posts on this thread. Refresh page