Meet the Other Phone. Flexible and made to last.

Meet the Other Phone.
Flexible and made to last.

Buy now

Please or to access all these features

Property/DIY

Join our Property forum for renovation, DIY, and house selling advice.

Road newly tarmacced - now back bedroom rattles

11 replies

NewspaperTaxis · 12/09/2024 13:42

Has anyone else experienced this? The Council re-Tarmaced our suburban road and I can't complain, it kind of needed doing. But since they did it a couple or so months ago, I've noticed when I'm in bed, in the back bedroom of the house, the house sort of quivers or slightly shakes whenever a lorry - I assume, or larger vehicle - goes past. Is that an inevitable consequence of having a firmer road? I can't say it's very pleasant, particularly in the early hours of the morning. I've never known that happen before, and it's the family home.

What's odd is that there seems nothing much I can do about it, and I'm not sure if the Council technically have done anything wrong anyway.

OP posts:
Sparklywhiteteeth · 13/09/2024 06:56

Did it never rattle before? I wonder if it is a new solid surface making the vibrations hit your house?

NewspaperTaxis · 13/09/2024 09:51

No, not that I ever noticed. I do put it down to the new solid surface - but surely it isn't meant to have that effect?

OP posts:
TizerorFizz · 13/09/2024 13:15

I just think your window doesn’t fit properly. Large moving lorries can have an effect on houses but a nice new road surface is rarely the cause. Potholed failed surfaces are usually worse. I think I’d just fix the window.

NewspaperTaxis · 13/09/2024 13:47

But the windows don't rattle. The house itself quivers.

OP posts:
Diyextension · 13/09/2024 14:05

🤣not sure where you got window from , when reading the op’s original post? 🤣

BlossomToLeaves · 13/09/2024 15:03

This happens to my flat (ground floor) that has a speed bump outside that large vehicles go over at speed; the building shakes. It mostly only bothers me in the early mornings, and I have found that putting the anti-vibration coasters (like they use for washing machines etc) under each of the bed posts has helped. If you don't have a bed frame with individual legs, you could also get an anti-vibration mat (or a set of mats) to put under the corners.

Sparklywhiteteeth · 13/09/2024 16:01

NewspaperTaxis · 13/09/2024 09:51

No, not that I ever noticed. I do put it down to the new solid surface - but surely it isn't meant to have that effect?

I don’t think it is no. What I’m thinking is there is no give in the new road. If thay makes sense, so it has wider impacting vibrations as it’s a harder surface than before.

Ariela · 13/09/2024 16:34

I imagine the traffic is faster as no potholes to negotiate, and that's the cause?

Sera1989 · 13/09/2024 16:39

Yes this happened to me! The road surface was worn down and cars braking and accelerating for a roundabout made my bedroom shake and the wardrobe creak. It's a subtle but noticeable shake like someone slamming a nearby door a few times. They resurfaced the road partially and it's a bit better but still happens at morning rush hour. I even contacted the council and they sent someone out who deemed the road surface to be sound and without issues (even though the roads around here are terrible, there weren't any potholes or large bumps)

NewspaperTaxis · 13/09/2024 19:27

These are all excellent responses, thank you everyone!

OP posts:
TizerorFizz · 14/09/2024 00:35

I don’t know why I read “windows” either! Basically it’s vibrations travelling from the road, through the ground, to your house. It’s not unusual and often older houses with next to no foundations are most affected. It might be the type of surface used that’s setting up the vibrations. A very smooth surface shouldn’t do this but how traffic goes over the surface has presumably changed.

New posts on this thread. Refresh page
Swipe left for the next trending thread