Meet the Other Phone. Protection built in.

Meet the Other Phone.
Protection built in.

Buy now

Please or to access all these features

AIBU?

Share your dilemmas and get honest opinions from other Mumsnetters.

I have wrecked my gas hob! Help

37 replies

Yarboosucks · 20/08/2020 12:44

Posting here for traffic - very unreasonable I know

I have been really stoopid and have used oven cleaner on my gas hob collars. This took the silver coloured coating off. Can I use specialist high temperature paint (for bbqs and wood burners) to paint/spray them to look nicer?

OP posts:
ItsIslandTime · 20/08/2020 19:07

I don’t think you will notice that in a few days. 🤷🏻‍♀️

Hydrobatespelagicus · 20/08/2020 19:50

I think those bits are aluminium and you've oxidised them with the oven cleaner. The same thing happens if you put aluminium in the dishwasher.

I would take a scouring pad to it to remove the oxidation and they will come up shinier (but not perfect like before). Check they are aluminium with a magnet - it shouldn't stick.

RunningFromInsanity · 20/08/2020 19:52

I did the same with oven pride and took off all the silver paint including the temperature numbers and diagrams which show which knob is for which hob.

It’s a 1/6 chance you turn on the right gas ring now and a complete guess as to what temperature the oven is.

EveryDayIsADuvetDay · 20/08/2020 19:56

don't think I'd want to mess around with spray paint on a gas hob.
Damage doesn't look that bad - compared to a potentially burned down house Hmm

Flatpackback · 20/08/2020 19:58

A thought - since they look awful already, try a Brillo pad. It might improve & I doubt it will look worse

Namechange2020onceagain · 20/08/2020 20:30

The paint said up to 600 degrees so should be okay. It does say that the heat cures it and it will off-gas for around an hour, so you would need really good ventilation while it's doing that.

I think I would just buy a new hob or like pp suggested, brillo pad it.

Do those bits come off the hob?

Yarboosucks · 20/08/2020 20:52

Right! I have a hot date with a brillo pad tomorrow. I will not paint them. A friend is going to see if they can be chrome plated (dull not shiny!) by his dad.

OP posts:
Yarboosucks · 20/08/2020 20:59

and this has been highly recommended too
www.amazon.co.uk/Mothers-Mag-Aluminium-Polish-5oz?tag=mumsnetforu03-21

OP posts:
Still1nLove · 20/08/2020 21:58

I thought this was going to be part two of the spatula and the lube thread 🤣

Namechange2020onceagain · 20/08/2020 23:04

@Still1nLove

I thought this was going to be part two of the spatula and the lube thread 🤣
🤣 That was my first thought on reading the title. This is clearly a job for fish slice and sex lube!
Yarboosucks · 23/08/2020 20:25

@Hydrobatespelagicus - Thank you so much! It was indeed oxidisation and they have polished up as good as new. Thank you again!

OP posts:
Hydrobatespelagicus · 23/08/2020 21:54

Good news! Glad to hear it.

New posts on this thread. Refresh page
Swipe left for the next trending thread