Advanced search

Kinetico installation

(37 Posts)
thereinmadnesslies Sun 21-Apr-13 14:16:14

We are getting a Kinetico water softener installed tomorrow.

Has anyone else had one put in?

If so did you keep one kitchen tap unsoftened?

Will the installer need to check all the bathrooms etc - I'm not sure if I should be tidying up or not [lazy emoicon]

OrangeSunset Tue 23-Apr-13 20:10:23

Thanks Piglet for the info. The plumber didn't sound like he was convinced re. corrosion so I'm now prepared to stand my ground.

thekingfisher when you say it's more efficient to use the blocks, do you mean in cost per year? It does sound like an easier method of topping up the salt.

PigletJohn Tue 23-Apr-13 13:11:48

I would

have you looked at the low-sodium diet info above?

mumtominx Tue 23-Apr-13 12:44:18

Soon to get a softener installed but the plumber has not advised a boiling water tap as it would not be using softened water and would scale up really quickly.

Is it ok to have the boiling water tap running off the softened water then?

pootlebug Mon 22-Apr-13 18:23:51

We have a Kinetico and love it too. Our kitchen tap and boiling water tap both have softened water. We do have un-softened water in the utility room tap. If I'm drinking water I fill up a bottle/jug from the utility room as prefer the taste of unsoftened, but obviously for tea/coffee/cooking etc we drink the softened stuff.

We get our salt from a supplier who delivers locally that I found on ebay.

thereinmadnesslies Mon 22-Apr-13 17:52:21

Thanks everyone for the feedback and reassurance gringrin

RunsWithScissors Mon 22-Apr-13 13:47:35

kingfisher thanks for the input too. Would love not having to descale the kettle (deal with marks on taps, water on shower door... )

RunsWithScissors Mon 22-Apr-13 13:46:29

Yay! Glad to hear it went well.

PigletJohn, as always you have been a wonderful help (I've gleaned a lot of wonderful/helpful information from your post helping others on the site). Very much appreciated.

thereinmadnesslies Mon 22-Apr-13 13:34:51

Yay it's all fitted. The installation guy was lovely, it was a tricky job but he didn't moan about the extra stuff.

thekingfisher Mon 22-Apr-13 12:28:02

we have had 2 kinetico softners and use the blocks which are def more efficient ( we've had 2 as we moved house from where the original was installed) We got the installer to deliver salt in the blocks.
We have a cold water drinking tap in the litchen but I make all our hot drinks with the softened water.

you will notce a difference I promise

PigletJohn Mon 22-Apr-13 12:23:17

I drink mine. It makes better tea.

I think I found the sodium (not salt) content of softened water on Wikipedia. The example I found was for abnormally high content due to abnormally hard water somewhere in the US, but IIRC you get more sodium from a bowl of cornflakes, or two slices of bread, or a dollop of ketchup, than from a day's drinking softened water. The harder the incoming water is, the more sodium bicarbonate you find in the softened water, as it works by ionic exchange with the calcium.

here we are A person who drinks two liters (2 L) of softened, extremely hard water (assume 30 gpg) will consume about 126 mg more sodium (2L or 0.528 gallon x 30 gpg x 8 mg/L/gpg = 126 mg), than if unsoftened water is consumed


A low sodium diet is a diet that includes no more than 1,500 to 2,400 mg of sodium per day.

(One teaspoon of salt has about 2,300 mg sodium.) People who follow a vigorous or moderate exercise schedule are usually advised to limit their sodium intake to 3,000 mg per day and those with moderate to severe heart failure are usually advised to limit their sodium intake to 2,000 mg per day.[citation needed]. People who have been diagnosed with Ménière's disease, as well, need to follow a low-sodium diet. The human minimum requirement for sodium in the diet is about 500 mg per day, which is typically less than one-sixth as much as many diets "seasoned to taste". For certain people with salt-sensitive blood pressure, this extra intake may cause a negative effect on health]]

RunsWithScissors Mon 22-Apr-13 11:48:56

Hope the solution is simple (and not costly) madness

RunsWithScissors Mon 22-Apr-13 11:47:18

Sorry to barge in to the thread to ask pigletJohn a question.

So, if the salt is very minimal does that mean its fine for drinking (the health/age issues you mentioned aside), and no need for an additional "drinking water" tap?

Our last house had a water softener installed with a drinking water tap which we were advised to use by previous owner. This meant having to descale the kettle still. Would love to hear the taps could remain as is...

Oh, also, what is the approx cost of getting a softener installed/cost for salt in a year. Looking to do kitchen Reno/extension in next few years and might be a good time to add one in.

Thank you!

thereinmadnesslies Mon 22-Apr-13 11:21:56

They definitely claim that the softener helps eczema, it's something we are interested in because DC2 has really bad skin. We will see.

The installation guy is here. We've had to make a big hole in the wall because the plumber who did our extension didn't leave the pipes in the right place, despite us specifying plumbing for a softener installation at a later stage. But the installer seems really nice and willing to find a solution. Fingers crossed it goes well from here.

PigletJohn Mon 22-Apr-13 11:12:36

found it

PigletJohn Mon 22-Apr-13 11:09:08

I haven't found the BSI test report yet, but the Softener company's document is here (ignore the marketing hype)

PigletJohn Mon 22-Apr-13 11:02:08


there is a lot of talk but very little evidence. Older plumbers say that softened water is not good for boilers and radiators. However the manufacturers of corrosion inhibitors for central heating systems say that their prodiucts work with softened water.

There was a laboratory test on water softeners and boilers done within the last year or so to try to find out the truth; and it showed no significant difference in corrosion; it was so slow that it would not be apparent during the life of a boiler. I have been using softened water in my radiators for over 20 years and there is no evidence of corrosion.

However, Aluminium is a metal which is very prone to corrosion, and some boilers, especially combis, used Aluminium for a while in their heat exchangers after cast iron fell out of favour. Aluminium heat exchangers seem to be very prone to corroson and blockage, even without softeners.

My own boiler has a stainless steel exchanger (one reason why I chose it) and no sign of corrosion.

I have not heard any rumours of softened water causing damage in anything else.

BTW it is not true, as some people think, that a water softener adds salt to the water in the taps. The salt is only used to periodically regenerate the resin which absorbs calcium from the incoming water.

Themobstersknife Mon 22-Apr-13 10:32:45

Thanks 3littlefrogs.

3littlefrogs Mon 22-Apr-13 10:31:39

I find softened water does help with eczema. Whether this is because you need to use far less soap/washing powder etc I don't know, but it has made a huge difference to me.

I was advised to get a water softener by my plumber because it stops your pipes getting blocked.

I live in a very hard water area and limescale was a big problem for me.

Themobstersknife Mon 22-Apr-13 10:26:20

Has anyone had one fitted to help with eczema? I have terrible itchy skin, but when I stayed with a relative who had softened water for a couple of days, I had a bath and a shower and my skin had nearly cleared up. But it might have been a coincedence.?

OrangeSunset Mon 22-Apr-13 10:21:12

Just as an aside, is it correct that softened water can damage some fittings/appliances?

We are planning to get one, but in a brief conversation with the plumber, he said softened water will corrode some things? Not something I'd heard before hmm

thereinmadnesslies Mon 22-Apr-13 10:03:33

Not a good start, the installation engineer was meant to be here at 9.30 but according to the office is running late hmm I hate waiting around for people.

PigletJohn Sun 21-Apr-13 21:25:21

nope, they have definitely got heavier over the last 20 years wink

FishfingersAreOK Sun 21-Apr-13 21:18:43 inaccuracy from Piglet grin....I am thinking that the 20kg bags have not become increasingly heavy to carry....they are undoubtedly still 20kg....wink

3littlefrogs Sun 21-Apr-13 18:46:31

My Kinetico takes the blocks. I found a local supplier to deliver them.

PigletJohn Sun 21-Apr-13 18:29:24

I get mine from an online supplier. If you google you will find someone nearby who will deliver. Wickes also carry it. Don't carry them in your own car because even a few specks of salt dust will corrode a hole in the steel. Look at the floor of the delivery van when it arrives. I used to get the 20kg bags but they have got increasingly heavy to lug about and pour in, so I get 10kg bags now, which works out a little dearer. Tablets are cleaner to handle than granules, or yours might take blocks. Do not let salt spill on any tools or vehicles in the garage. It might be worth putting down a piece of vinyl flooring to make it easier to clean up any spillage. You will not believe how fast metal is eaten away.

Join the discussion

Join the discussion

Registering is free, easy, and means you can join in the discussion, get discounts, win prizes and lots more.

Register now