My feed
Premium

Please
or
to access all these features

Find cleaning advice from other Mumsnetters on our Housekeeping forum.

Housekeeping

How do you clean a stainless silver extractor?

13 replies

MrsPear · 26/03/2013 15:05

That is it it really. Thanks for any tips.

Oh and grease on the top of cabinet in the kitchen.

OP posts:
Report
mummylin2495 · 26/03/2013 15:19

You can use baby oil or something similar to clean stainless steel,even cooking oil. Just spread some on then give a good wipe with dry cloth or kitchen roll.it will come up lovely and shiny again.

Report
KatyTheCleaningLady · 26/03/2013 19:39

They are easy to clean with a degreaser (Cillit Bang is good) but they're hard to get them all shiney and perfect - there will probably be streaks and smears unless you spend a long, long time polishing it. But, getting the dirt and grease off is doable with Cillit Bang.

The same product will work on the tops of the units.

Report
MrsPear · 27/03/2013 14:38

Thanks for the tips. Katy thanks for the replies on the other thread too. Emptied 3 kitchn cupboards and actually look clean which shows i can't be a complete slattern

OP posts:
Report
unlucky83 · 27/03/2013 14:52

Bicarb of soda - the best thing ever for this job.
Pour it on a worktop, dab a damp cloth in it and wipe with it ...then wipe off
Never some across anything near as good...fantastic!

Report
KatyTheCleaningLady · 27/03/2013 15:41

MrsPear, my house is a tip! I am a slattern in my own home!

Report
EntWife · 27/03/2013 16:06

Johnsons Baby Wipes. Cuts through the grease like butter. Also, really good for cleaning wooden floors. Wink

Report
fussychica · 27/03/2013 19:03

ecloth for shine once it's clean & degreased.

Report
DTisMYdoctor · 27/03/2013 20:25

I second bicarb for degreasing. Wondrous stuff.

Report
Imlostwithoutahope · 28/03/2013 22:16

Wd40. Smells a bit but is brilliant for removing greasy mark and getting a even, clean silver finish again.
I use it on kitchen roll on my oven door, hob and cooker hood.

Report
WillSingForCake · 29/03/2013 14:49

I agree with EntWife - baby wipes are great for cleaning the extractor!

Report
KatyTheCleaningLady · 30/03/2013 09:45

I'm intrigued by the suggestions to use oil or WD40 to clean them. I would rather use my industrial-strength degreaser for cleaning, but it may be worth trying some WD 40 after cleaning in order to get the polish even and streak-free. That's the sort of thing that would really "wow" a customer.

Report
TomDudgeon · 30/03/2013 10:03

Even better than bicarbonate I recently discovered cream of tartar does a fantastic job

Report
unlucky83 · 30/03/2013 19:53

That's interesting - but makes sense - cream of tartar is an acid (bicarb - alkaline). Acid and alkaline work cos they both chemically change the grease.
The oil works cos grease is not soluble in water but is soluble in other fats ...I think that is probably why baby wipes work - the moisturisers in there... remember soap used to be made from animal fat - lard in fact!
Strong alcohol would work as well (but can think of better things to do with that) Apparently white spirit works really well too -but stinks and really not environmentally friendly -shouldn't put it down sink etc
Things like washing up liquid just provide chemicals which let oil particles stick together in little droplets in the water so they can be carried away in the dirty water....

Report
Please create an account

To comment on this thread you need to create a Mumsnet account.