Advanced search

Pregnant? See how your baby develops, your body changes, and what you can expect during each week of your pregnancy with the Mumsnet Pregnancy Calendar.

Help me - am I stupid - I can't put my cot together

(33 Posts)
Devongirl Sun 10-Sep-06 10:28:45

I have been given a cot, a Mamas and Papas what looks like a Sherwood, but I cannot figure out how to put it together as there are no instructions with it. Has anyone got any instructions they can post for me? Any help gratefully appreciated!!!

I don't want to have to wait til DH comes in, need to prove I can actually do something without him!

Bobbi123 Thu 21-Feb-13 12:48:01

I just got a cot and thank you so much SAKA you just helped me put my cot together smile all on my own haha!! Thanks xx

Teddie2000 Tue 03-May-11 18:18:41

I build all manner of flatpack furniture (mainly wardrobes becuase these are too big for many people), but have also built entire ranges of nursery furniture.

A typical nursery set (cot, wardrobe, baby changer/chest of drawers, toy box and glider chair with stool) usually takes me about 2 hours to unpack and assemble. A cot or cotbed takes 15 minutes.

If anyone gets stuck just ask me for help on here or please visit my website and I'll give you any help you need.

LisaLulu Wed 15-Nov-06 17:29:44

Dear Devongirl, I'm afraid I'm in exactly the same situation you were with the Sherwood cot. Would you still have the instructions for assembly at all?
many thanks, LisaLulu.

Devongirl Mon 11-Sep-06 11:56:52

Saka, I have just read a few of your messages on the October thread - I feel so stupid for going on about a cot when you have so much going on in your life. If you want to talk, email me directly on xxx

Devongirl Mon 11-Sep-06 10:36:47

Ah that's a real bummer Saka, what a shame. Is it a cot with a variable height to it so at least you won't have to bend over too far?

Thanks for all your good wishes - I will keep a look out in October as well for your news

Best wishes, and thanks again xxxxxxxxxxxxxxxxxx

saka Sun 10-Sep-06 14:29:53

No return on the cot - I would have to take it to the post office, and then up to seven days for them to decide if thy will accept it, longer to get the refund...I just dont have the time/energy to do it.

Im stuck with the fixed side cot. Oh well...

saka Sun 10-Sep-06 14:02:09

HI devongirl!

very well done for getting that cot put together!!!!!!!!!!! hugs!!!1

Im glad I could help - was it the base the wrong way round that was the problem?

My baby is due in 13th October...and I really should get his cot together. Well done you for doing it now. I think I really am too fat to even contemplate it alone.

It is great to get a job like that done, isnt it?! Im really proud of you, I have to admit, cots, and worse, car seats are a real nightmare. I looked at the instructions for my carseat and just laughed.

It took me and a friend 2 hours to put together my pushchair from mamas and papas. It arrived in pieces, with intrauctions, and wasnt just stick on the wheels, it was really contruction stuff. Im not sure I would buy mamas and papas again. Then to get the bit attatched which turns it into a pram was even worse. Eventually we worked out that the zip had been swen in inside out and that was the last problem.

Good luck with the baby, Ill keep an eye out on the december thread to see when s/he will be using that cot.

very best wishes


Devongirl Sun 10-Sep-06 12:37:37

Saka I have done it! I feel like Einstein! (But a pregnant, fat, knackered Einstein!)

I am so glad I have done this on my own (except for your help obviously!) I was tempted to give up about 2 hours ago but Mumsnet to the rescue!

The room looks so weird now, I can't believe there will be a baby in it in a few months! That is surreal.

Baby isn't due until December 19th, but the room is quite small and I wanted to see if I will fit a changing unit and a chair in there - but it looks like I will so I can go ahead a shop now!

When is your baby due?

I am glad you feel like I did you a favour - it would have been awful to wait til the last minute to put the cot up only to find that out

Thanks again x a million {{{{hug}}}}}

saka Sun 10-Sep-06 12:04:56

Its fine, Im just relieved I found out now, not when I had scratched it putting it together. It is definately going back!

I really hope you get your cot put together. Once I start doing a job like that, I cant just give up either...hug!

So actually, you did me a huge favour, by prompting me to get the instructions out! It is a pretty cot...but no drop side, that is just silly!

Ill be fine...get there in teh end..this is my second cot - the first had to go back as it was delivered water damaged!

When is your baby due devongirl?

Devongirl Sun 10-Sep-06 11:58:51

Oh Saka, I'm sorry - what a shame. I am sure you'll be able to swap it as it's a genuine mistake. It's weird that they even make fixed sides ones. At least you've found out now x

saka Sun 10-Sep-06 11:57:00

Wondering if I can send cot back...Ive only got the intructions out the box..I had no idea the sides didnt drop..and after having one baby, I know that that isnt really an optional extra...

Can I cry now please?

Sorry devon girl....

Devongirl Sun 10-Sep-06 11:56:37

No don't be daft, you haven't wasted my time because you've sorted out at least one problem for me!

I am sure someone else with a drop sided cot will come along sooner or later,

Thanks again

saka Sun 10-Sep-06 11:55:04

Just got out the catalogue....ohhhhhh nooooooooooooooooooooooo my cot doesnt have 'unique one handed drop side/' In fact it appears my sides dont drop at all! I thought that was standard on a 150 pound mamas and papas cot! What a mistake...sorry to waste your time, devon girl....My sides are fixed! Nightmare!

Devongirl Sun 10-Sep-06 11:52:10

Right, all making sense so far - I can see at least one place I have gone wrong (the base is upside down!)

saka Sun 10-Sep-06 11:51:59

Step 6

Push the base bracket nuts into the holes in the corners of the base and screw them onto the threaded ends of the base brackets using the allen key....

mamas and papas customer service 08708307700....

That should be it...

erm...mine has allegedly sludy mention of how to fit them so they slide..perhaps something to do with the base being th eright way up ... one sec..Ill read again..make sure I havent missed anthing on the picutres..

saka Sun 10-Sep-06 11:48:23

OK...step 5
Attatch the base with the information label facing upwards.

Lower the base onto the brackets so the threaded ends of the brackets fit into the holes in the corners of the base

saka Sun 10-Sep-06 11:47:07

Ohhhhh typo! The THREADED ENDS should be facing upwards...
its fine! really my pleasure!

trinityshiftingherleatheryarse Sun 10-Sep-06 11:46:44

lol whoops

Devongirl Sun 10-Sep-06 11:46:20

Trinity, maybe the instructions put you off! Maybe I am better off winging it! - it's the right shape so far, it's just that the side doesn't stay up... which kind of defeats its purpose a little bit

saka Sun 10-Sep-06 11:46:00

step 4

get the base brackets (xs 4)

They are bent L shaped screws with one smooth arm and one twisted screw type arm...

Slot the unthreaded ends of the four base brackets into ONE of the four base heights in the cot ends. Ensure they are all at the same height.. After fitting the unthreaded ends must be facing upwards.

Devongirl Sun 10-Sep-06 11:44:52

Oy Kbear, no negativity!! DH must think I have turned from a pretty hands on DIY ish kind of gal to a lump of useless lard in the space of 6 months cos I can't finish a job, so I am totally determined to crack this today!

Devongirl Sun 10-Sep-06 11:42:19

Yes this is kind of right, except I don't have base brackets and I DO have two metal poles for the side to slide up and down on. But so far the instructions make sense, so carry on if that's ok!

saka Sun 10-Sep-06 11:41:56

Step 3

ok so far?

Attatch the remaining cot side to the head and foot ends, ensure that the plastic teething rail is at the top and the matress height mark faces into the cot.

Slot 4 assembly screws through the top and bottom holes in the cot side and into the holes i the head and foot ends. Tighten with allen key


trinityshiftingherleatheryarse Sun 10-Sep-06 11:41:24

good ness, if your stupid then I'm really dumb cause when I bought my cot and HAD instructions it still took me and my friend what seemed like hours to figure it out

saka Sun 10-Sep-06 11:40:03

Step 2

Attatch the foot end to the cot side.
Slot two assembly screws through the top and bottom holes in the cot side and into the holes in the foot end.
Tighten them with the allen key

Join the discussion

Registering is free, easy, and means you can join in the discussion, watch threads, get discounts, win prizes and lots more.

Register now »

Already registered? Log in with: